Cisco ONS 15454 High-Density OC-3 Cards

Network Liquidators is the premier online destination to sell and buy Cisco 15454 MSSP high-density OC-3 cards. We keep an extensive inventory of used and new Cisco ONS 15454 ethernet cards in stock at most times which are usually available for overnight delivery. Along with the Cisco 15454 high-density Cards, we also carry many other parts and accessories.

All of our Cisco ONS 15454 high-density OC-3 cards go through a grueling inspection, testing and refurbishing process and all of our refurbished and used Cisco ONS 15454 MSSP series equipment comes standard with our Lifetime Warranty (end-user customers only). For details about our inspection, testing and refurbishing process, click here.

If you cannot find the exact Cisco ONS 15454 OC-3 card you are looking for, please call one of our account executives at 1-800-998-9862 for a custom quote. if you are not sure what you need, we have technicians on staff experienced with Cisco Cerent Optical Equipment that can help you with your configurations.
 
We both buy and sell Cisco 15454 ONS OC-3 cards as well as other ONS 15454 MSPP parts, components, and accessories. Let us know if you have any surplus Cisco Systems Cerent ONS 15454 high-density interface cards that you are looking to sell and we will immediately reply with fair market value. Please call our purchasing department at 1-800-998-9862. We want to be your source for Cisco ONS 15454 network equipment.

Cisco 15454-OC3I8-1310

Cisco 15454E-S1.1-8

Information on Cisco ONS 15454 High-Density OC-3 Cards

The high-density eight-port OC-3/STM-1 card (Figure 1) delivers greater service densities and advances the system footprint on the Cisco ONS 15454 and Cisco ONS 15454 SDH multiservice provisioning platforms.

The high-density, eight-port OC-3/STM-1 card provides eight transmit and eight receive optical interfaces on a single-width module. Each interface operates at the standard SONET/SDH (Telcordia GR-253-CORE and ITU G-703) 155.520-Mbps bit rate, intermediate/short-haul reach of 13 decibels (dB), over 1310-nanometer (nm) optics. Small form factor LC-style optical connectors provide the necessary density to terminate the eight signals on a single card. Each is angled down, relative to the faceplate, to reduce bend-related stress. Each OC-3/STM-1 port is provisionable to support unidirectional path switched ring (path protection)/subnetwork connection protection (SNCP), 1+1 automatic protection switching (APS)/MSP, or unprotected operation, providing networking flexibility for building access rings or aggregating traffic from terminal devices such as routers, ATM switches, or other SONET network elements. The card supports both concatenated (STS-3c) and non-concatenated (VT-1.5, VC-11/-12, STS-1/AU-3, VC-4) signals to enable transport of high-bandwidth data traffic as well as lower-speed services. In SONET mode, the optical ports can be provisioned as STM-1 to enable the tunneling of SDH payloads over a SONET network. This enables North American service providers to transport SDH traffic from international cable landing points to customer sites.

The high-density OC-3/STM-1 card incorporates faceplate-mounted LEDs to provide a quick visual check on the operational status at the card as well as the interface ports. A shelf-slot icon, a brown star, is printed on the faceplate to indicate the shelf slot where the card can be installed. The card is supported by the integrated Cisco ONS 15454 Transport Controller craft manager, which provides the user access for operations, administration, maintenance, and provisioning for the system.

We can help you in developing a Cisco ONS 15454 system designed to fit your needs. These systems are assemble to order. Give us the technical details of your work environment and we will map out what you will need providing alternative solutions from where budgeting needs to be adjusted.

Cisco ONS 15454 High-Density OC-3 Cards Specs

About Network Liquidators:

Quality Cisco ONS 15454 Cards

Networking Forums