New and Used Cisco NPE-G1 Network Processing Engines for Sale (NPEG1)
Short Description: Used / Refurbished Cisco Processing Engine For 7200 Series (Cisco 7200 series)
If you are looking to buy new or used and refurbished Cisco Network Processing Engines, you can stop searching. Vology has over $50 million of inventory stocked in our warehouse. In addition, we have one of the largest sourcing networks in the industry to locate your Cisco NPE-G1 fast at the best price possible. |
NPE-G1 Product Specifications
- Storage temperature: -38 to 150°F (-40 to 70°C)
- Operating temperature, nominal: 41° to 104°F (5 to 40°C)
- Operating temperature, short term: 23 to 131°F (-5 to 55°C)
- Storage relative humidity: 5 to 95% relative humidity (RH)
- Operating humidity, nominal: 5 to 85% RH
- Operating humidity, short term: 5 to 90% RH
- Operating altitude: -60 to 4000 m
- Height: 1.40 in. (3.556 cm)
- Width: 15.15 in. (38.481 cm)
- Depth: 11.12 in. (28.245 cm)
- Provides performance of up to 1 million packets per second (PPS) in Cisco Express Forwarding switching (an increase of up to 250 percent over the Cisco 7200 Series NPE-400)
- Offers three Gigabit Ethernet/Fast Ethernet ports that do not take up bandwidth points
- Doubles the amount of available DRAM (to 1 GB)
- Eliminates the requirement for an input/output (I/O) controller
- Eliminates I/O controller LAN interface bandwidth points
- Provides modular processors and the ability to upgrade
- Offers improved price performance
- Gigabit Ethernet port features: all three ports support the IEEE 802.1Q standard.
- NPE-G1 supports three types of GBICS: SX, LX/LH, and ZX for varying fiber length requirements.
- Console and auxiliary ports: Because the NPE-G1 has a console port and an auxiliary port, and handles the other functionality of the I/O controller, the need for an I/O controller is eliminated. However, an I/O controller can still be used. If an I/O controller is detected in the I/O controller slot, I/O controller functionality defaults to the I/O controller (with the exception of Non-volatile Random Access Memory [NVRAM] and boot flash). The console and auxiliary ports of the NPE-G1 are then disabled.
- SDRAM: 256 MB (default), 512 MB, and 1 GB. There are two DRAM memory slots, so 256 MB of memory consists of two 128 MB memory SODIMMs, 512 MB consists of two 256 MB memory SODIMMs, and 1 GB consists of two 512 MB memory SODIMMs. It is necessary to have the same size SODIMM in each memory bank on an NPE-G1. The type of DRAM memory being used on the NPE-G1 is double data-rate (DDR) memory. DDR memory provides high-performance memory access rates.
- Compact flash: 64 MB (default), 128 MB, and 256 MB. The compact flash used on the NPE-G1 is the same compact flash used with the Cisco 7400 and 7300 series Internet routers.
- 512 KB NVRAM or 512 KB.
- 512 KB Layer 2 cache.
- 16 MB packet memory on 256 MB SDRAM and 32 MB packet memory on 512 MB and 1 GB SDRAM.
- ECC support (SDRAM and Layer 2 cache).
- 700 MHz Broadcom BCM1250 processor
- Chassis: The NPE-G1 is supported on the Cisco 7204VXR and Cisco 7206VXR chassis.
- I/O controllers: Although a Cisco 7200VXR chassis with an NPE-G1 does not require the use of an I/O controller, an I/O controller can still be used. The NPE-G1 is supported with the following Cisco 7200 Series I/O controller part numbers: C7200-I/O, C7200-I/O-2FE/E, C7200-I/O-GE+E.
- Port adapters: The NPE-G1 is supported with all port adapters that can be ordered with the Cisco 7200VXR chassis as of August 1, 2002 except for the following: PA-A2-4T1C-OC3SM, PA-A2-4T1C-T3ATM, PA-A2-4E1XC-OC3SM, and PA-A2-4E1XC-E3ATM
- The NPE-G1 is supported in 12.2(4)BW, 12.2(15)B, 12.2(14)S, 12.2(14)SU, 12.2(15)T, 12.1(14)E, 12.3(1), 12.3(2)T, 12.0(28)S, 12.3(1a)B, and later Cisco IOS releases.
