New and Used Cisco 7301-BB-8K Router Chassis Bundles (Cisco7301-BB-8K) for Sale (CISCO7301BB8K)
Short Description: Used / Refurbished Cisco 7301 Router with 256MB SDRAM Memory, 8K Sub Broadband Feature License (Cisco 7301 series)
If you are looking to buy new or used and refurbished Cisco Router Chassis Bundles, you can stop searching. Vology has over $50 million of inventory stocked in our warehouse. In addition, we have one of the largest sourcing networks in the industry to locate your Cisco 7301-BB-8K fast at the best price possible. |
CISCO7301-BB-8K Product Specifications
- Broadband Aggregation Feature License to Support 8000 Sessions
- 700 MHz Integrated Processor
- 3 x FE (10/100/1000) or Gigabit Ethernet LAN Ports
- SFPs (ZX, LX/LH, SX)
- 256 MB Default DRAM Memory to a Maximum of 1 GB
- 64 MB Default Compact Flash Memory with a Maximum of 256 MB
- Cisco IOS Software Releases of 12.2(11)YZ; 12.2(13)B; 12.3.(2)T
- Compact, Power-Efficient 1RU Form Factor
- Front-to-Back Airflow and Single-Sided Management
- 1.73 in. x 17.3 in. x 13.87 in. (H x W x D)
- Chassis Fully Configured with a Port Adapter 10.5 lb Approximately
- Heat Dissipation at 50W (170 BTU typical, 75W (255 BTU) maximum
- Humidity Level of Operation should be between 10 to 90% Humidity Noncondensing
- Only use in between Temperatures of 32 to 104°F (0 to 40°C), Operating; -4 to 149°F (-20 to 65°C), Nonoperating
- The minimum software requirement for the Cisco 7301 Router is Cisco IOS Software Release 12.2 (11)YZ or later.
- Compatible Cisco7301 Router SDRAM Memory includes parts MEM-7301-256MB, MEM-7301-512MB, and MEM-7301-1GB.
- Compatible Cisco7301 Router Compact Flash Memory includes parts MEM-7301-FLD64, MEM-7301-FLD128, and MEM-7301-FLD256.
- Compatible Cisco7301 Router SFP Optic GBICS include GLC-SX-MM and GLC-LH-SM.
- Compatible Cisco7301 Router Power Supplies include parts PWR-7301-AC, PWR-7301/2-AC, PWR-7301-DC48, and PWR-7301/2-DC48.
- Broadband aggregation: PTA/LAC or LNS/TS aggregation router capable of handling up to 16,000 simultaneous sessions and allowing for a pay-as-you-grow "rack and stack" architecture.
- IPv6 gateway: Linking between an IPv4 network and an IPv6 network, including IPv6 VPN architectures.
- Managed services: High-end customer premises equipment (CPE) or Multiprotocol Label Switching-customer edge (MPLS-CE) devices due to its high-performance, feature-rich support with both Gigabit Ethernet LAN connectivity and WAN port adapter connectivity.
- High-availability design: 100 percent redundancy via 2 CPEs configured for Hot Standby Router Protocol (HSRP) or Layer 3 load balancing.
- Cost-effective route reflector: Ideally suited as a low cost route reflector with its ability to hold one million routes with its maximum of 1 GB memory installed.






