Bookmark  
   
 
Cisco CCNP / BCMSN Exam Tutorial Multicasting And The RPF Check

Cisco CCNP / BCMSN Exam Tutorial: Multicasting And The RPF Check

Page:  1 | 2 | 3 | 4 | 5 | 6 | 7 or Go To our Certification Articles Section

Multicasting is a vital topic on your BCMSN, CCNP, and CCIE exams, and it can also be very confusing when you first start studying it. Multicasting uses concepts that are unlike anything you've run into in your routing protocol studies, and that can throw you at first. I speak from experience that multicasting is like any other Cisco technology - learn the basics, master the fundamentals, and then build your skills on that foundation.

One such fundamental is the RPF Check, or Reverse Path Forwarding Check.

A fundamental difference between unicasting and multicasting is that a unicast is routed by sending it toward the destination, while a multicast is routed by sending it away from its source.

"toward the destination" and "away from its source" sound like the same thing, but they're not. A unicast is going to follow a single path from source to destination. The only factor the routers care about is the destination IP address - the source IP address isn't a factor.

With multicast routing, the destination is a multicast IP group address. It's the multicast router's job to decide which paths will lead back to the source (upstream) and which paths are downstream from the source. Reverse Path Forwarding refers to the router's behavior of sending multicast packets away from the source rather than toward a specific destination.

The RPF Check is run against any incoming multicast packet. The multicast router examines the interface that the packet arrived on. If the packet comes in on an upstream interface - that is, an interface found on the reverse path that leads back to the source - the packet passes the check and will be forwarded. If the packet comes in on any other interface, the packet is dropped.

The RPF Check serves to verify the integrity of your multicasting network, and also serves as a reminder that the basic operation of multicasting is a lot different than unicasting!

About the Author:

Chris Bryant, CCIE #12933, is the owner of The Bryant Advantage, home of free CCNP and CCNA tutorials, The Ultimate CCNA Study Package, and Ultimate CCNP Study Packages.

You can also join his RSS feed and visit his blog, which is updated several times daily with new Cisco certification articles, free tutorials, and daily CCNA / CCNP exam questions! Details are on the website.

For a FREE copy of his latest e-books, “How To Pass The CCNA” and “How To Pass The CCNP”, just visit the website! You can also get FREE CCNA and CCNP exam questions every day! Pass the CCNP exam with The Bryant Advantage!

Page:  1 | 2 | 3 | 4 | 5 | 6 | 7 or Go To our Certification Articles Section
 
Relevant Resources

Need Cisco Hardware for your Cert?
Call 813.852.6400 now for more information to find the best router or switch to best help you with your certification exam. Having "real" hands-on experience is extremely beneficial not just for testing, but also ensures you are actually familiar with the device you are working on.
Cisco Routers
Cisco 600/800/1000 Series Routers
Cisco 1600 Series Routers
Cisco 1700 Series Routers
Cisco 2500 Series Routers
Cisco 2600 Series Routers
Cisco 3600 Series Routers
Cisco 3700 Series Routers
Cisco 7000 Series Routers
Cisco 12000 Series Routers
Cisco Switches
Cisco 1900 Series Catalyst Switches
Cisco 2900 Series Catalyst Switches
Cisco 3500 Series Catalyst Switches
Cisco 3550 Series Catalyst Switches
Cisco 3750 Series Catalyst Switches
Cisco 4000 Series Catalyst Switches
Cisco 5000 Series Catalyst Switches
Cisco 6000 Series Catalyst Switches